Drive-In | Drive-Thru Rack Systems

SpaceRak Drive-in / Drive-thru racks reduce the amount of conventional traffic aisles, permitting maximum use of space for high density, floor-to-ceiling palletized storage.

Drive In Racks

Drive In Racks allow vehicles to enter the storage area for pallet placement in a back-to-front arrangement, and require the operator to back-out of the rack after pallet placement. Drive In Racks are ideally suited for "FIRST-IN / LAST-OUT" inventory management. Drive In systems can also be designed as "double entry systems" in a back to back arrangement. Double entry systems allow for greater density and allow for entry on both sides of the system.

Drive Thru Racks:

Drive Thru Racks have two access aisle for loading and retrieval. Lift Trucks can pass through the rack bay, placing loads on supporting rails from one side, and exit in the same direction. Trucks can also enter the rack bay fro the opposite side to remove loads. Drive-Thru Racks are well suited for "FIRST-IN / FIRST-OUT" inventory movement.
Both Drive-In and Drive-Thru systems offer the advantages of high-density storage and lower costs.

Model Options

Frame Types:
- Roll Formed - Open & Closed Column
- Structural Channel
Depth Styles
- Drive-In Single Entry & Double Entry
- Recommended up to 10 Deep, per side
- Drive-Thru – recommended up to 10 deep
In-Bay Lift Truck Guidance:
- Floor-Mount Guide Angle, Rack Mounted Rub Rails
Load Rails:
- tructural Angle Rail – 3/16" & 3/4"
- Column Section – 14ga & 13ga
Top Tie Beams & Rail Support Beams
- Top-Ties for systems greater than 3 Deep
- Rail Support Beams for rear position of all Drive-In systems
Horizontal & Vertical X-Bracing
- Required & supplied as needed per design requirements and local codes

For more information on our products and availabilities contact us.